You are reading the documentation for version 2.2. Magento 2.3 is the latest version available. Ensure you are reading the documentation for your version of Magento.

Start the Module Manager

Start the Module Manager from the Magento Admin

To run the Module Manager:

  1. Log in to the Magento Admin as an administrator.
  2. Click System > Web Setup Wizard.
  3. Click Module Manager.

To upgrade Magento system software instead, see Run System Upgrade.

See one of the following sections:

About the Module Manager

The Module Manager displays a list of currently installed modules. You can either disable a module that’s currently enabled or you can enable a module that’s currently disabled.

Enabled and disabled modules

A green icon means that the module is enabled Green, which means the module is enabled.

A red icon means the module is disabled Red, which means the module is disabled.

Use pagination controls

To control the number of modules that display at a time, you can:

Specify number of items to display on page Specify the number of items to display on a page.

Move back and forward or specify a page number From left to right, move back one page, go to a specific page, or move forward one page.

Display module dependencies

Any module that depends on other modules displays as follows:

Module that depends on other modules

When you expand it, you see the modules it depends on; an example follows:

To disable such a module, you must first disable all dependent modules one at a time.

Enable or disable a module

This example shows how to disable a currently enabled module. You can use the same basic procedure to enable a disabled module.

To disable a module:

  1. Click Disable from the Action column, as the following figure shows.

    Disable a module

  2. Continue with Step 1. Readiness check.