Adobe Commerce 2.3 reached end of support in September 2022.

Configure Varnish for Commerce or Magento

Configure Magento to use Varnish

To configure Magento to use Varnish:

  1. Log in to the Admin as an administrator.
  2. Click Stores > Settings > Configuration > Advanced > System > Full Page Cache.
  3. From the Caching Application list, click Varnish Caching.
  4. Enter a value in the TTL for public content field.
  5. Expand Varnish Configuration and enter the following information:

    Field Description
    Access list

    Enter the fully qualified hostname, IP address, or Classless Inter-Domain Routing (CIDR) notation IP address range for which to invalidate content.

    More information

    Backend host

    Enter the fully qualified hostname or IP address and listen port of the Varnish backend or origin server; that is, the server providing the content Varnish will accelerate. Typically, this is your web server.

    More information

    Backend port Origin server's listen port.
    Grace period The grace period determines how long Varnish serves stale content if the backend is not responsive. The default value is 300 seconds.
  6. Click Save Config.

You can also activate Varnish from the command line–instead of logging in to the Admin—using the Magento command-line interface tool:

bin/magento config:set --scope=default --scope-code=0 system/full_page_cache/caching_application 2

Export a Varnish configuration file

To export a Varnish configuration file from the Admin panel:

  1. Click one of the export buttons to create a varnish.vcl you can use with Varnish.

    For example, if you have Varnish 4, click Export VCL for Varnish 4

    The following figure shows an example.

    Configure Magento to use Varnish in the Admin

  2. Back up your existing default.vcl. Then rename the varnish.vcl file you just exported to default.vcl. Then copy the file to the /etc/varnish/. directory.

    cp /etc/varnish/default.vcl /etc/varnish/default.vcl.bak2
    mv <download_directory>/varnish.vcl default.vcl
    cp <download_directory>/default.vcl /etc/varnish/default.vcl
  3. We recommend you open default.vcl and change the value of acl purge to the IP address of the Varnish host. (You can specify multiple hosts on separate lines or you can use CIDR notation as well.)

    For example,

     acl purge {
  4. If you want to customize the Vagrant health checks or grace mode or saint mode configuration, see Advanced Varnish configuration.

  5. Restart Varnish and your web server:

    service varnish restart
    service httpd restart

Cache Static Files

Static files should not be cached by default, but if you want to cache them, you can edit the section Static files caching in the VCL to have the following content:

# Static files should not be cached by default
  return (pass);

# But if you use a few locales and don't use CDN you can enable caching static files by commenting previous line (#return (pass);) and uncommenting next 3 lines
  #unset req.http.Https;
  #unset req.http./*  */;
  #unset req.http.Cookie;

You need to make these changes before you configure Magento to use Varnish.

Related topics